Parts for Kenmore Models 7215A REV B

Freezer door key

This white plastic freezer door key is used for most upright or chest freezers. If your door key becomes broken or lost it will need to be replaced. This is a genuine OEM part. It is sold individually.

Easy Part #:: EAP1991481

Availability:: In Stock

Price:: $10.45

Surface burner plug-in block kit (sub 0089336)

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or if it is not heating properly, it is likely an issue with the terminal block and it will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Easy Part #:: EAP340571

Availability:: In Stock

Price:: $12.49

Water valve with guard (water valve asm)

This double inlet water valve has quick connections. This valve has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.

Easy Part #:: EAP16226572

Availability:: In Stock

Price:: $76.66

Igniter kit (use wpl 279311)

This silicon carbide igniter with ceramic holder kit includes the 3-inch flat igniter, mounting bracket, 4-inch wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers. This part ignites the gas within the dryer to heat the dryer during the cycle, so if your dryer takes too long to dry, has no heat or not enough heat, you may need to replace the igniter. Be sure to disconnect the power source from your dryer before you do this repair. The igniter is very fragile and should be handled with care.

Easy Part #:: EAP334180

Availability:: In Stock

Price:: $34.93

Thermal cut-off kit (cutoff-tml)

This kit includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse with a limit of 360 degrees Fahrenheit. The thermostat and fuse help prevent the dryer from overheating.

Easy Part #:: EAP334278

Availability:: In Stock

Price:: $40.19

Crisper glass shelf insert (insert-pan cover)

Glass only. This glass insert measures 23.82 x 15.50-in. This is an authentic Frigidaire replacement part. The crisper shelf insert is designed by the manufacturer for use in refrigerators. This part is made of glass, and is placed over the crisper pan drawers. No tools are required when replacing this item. Simply remove the old part and slot the new one into place. This item is sold individually.

Easy Part #:: EAP429963

Availability:: In Stock

Price:: $90.88

Bake element - push on terminals - 240v (bake element)

The bake element is located on the bottom of the oven with male spade terminals and push-on terminals. The bake element provides heat for baking. If your oven is too hot, not heating evenly, element is not heating, or little to no heat when baking, you may need to replace your bake element. This is a genuine OEM part. Please remember to disconnect the power to the range before starting your repair.

Easy Part #:: EAP249238

Availability:: In Stock

Price:: $82.03

Drawer slide rail - left side (slide asm lh)

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. This part includes the rail only.

Easy Part #:: EAP306943

Availability:: In Stock

Price:: $24.55

Infinite burner switch (infinite burner switch - large element - 240v)

This surface burner switch controls the stove top 8-inch surface burner temperature. This switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp. If your element is not defective but will not heat, you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.

Easy Part #:: EAP1145040

Availability:: In Stock

Price:: $39.52

Mounting bracket (bracket, undercounter)

The mounting bracket is used to attach the dishwasher to the underside of the counter. The mounting bracket holds the dishwasher in place to keep it from moving during cycles and to keep the dishwasher level. The bracket is made of metal and is approximately 3” in length. The screws are not included with the bracket, they must be ordered separately. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the dishwasher before starting the repair.

Easy Part #:: EAP11745496

Availability:: In Stock

Price:: $15.68

Surface element - 8 inch - 2600w (8 inch electric coil surface element with looped terminals, 2600 watts. 5 turns.)

This surface burner element is eight inches in diameter. It has five turns, 2600 watts and looped terminal ends. The element provides heat to the cooking surface on your range. If your element is not heating, you may need to replace this part. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part. It is sold individually.

Easy Part #:: EAP2339242

Availability:: In Stock

Price:: $18.97

Door handle

This white handle can be used with both the freezer door and the fresh food door of many refrigerators. Note: As per manufacture this handle includes the mounting block and screw for the top of the handle, If you need the screw for the bottom it must be ordered separately.

Easy Part #:: EAP427922

Availability:: In Stock

Price:: $44.23

Temperature sensor (sensor temp)

The temperature sensor, also known as a thermistor, helps detect the temperature inside the refrigerator and sends the information to the control board. If your refrigerator is too warm or not cooling properly, you may need to replace the temperature sensor. This is a genuine OEM part. Please make sure to disconnect the power to the refrigerator before starting your repair.

Easy Part #:: EAP304103

Availability:: In Stock

Price:: $20.68

Lint filter - white frame (trap lint)

The lint filter is used to collect lint and debris as it passes through the dryer vent. It is recommended to clean the lint filter before every load. If your dryer takes too long to dry, the lint filter frame becomes damaged or the filter has torn you may need to replace the lint filter. The frame is white in color. This is a genuine OEM part.

Easy Part #:: EAP11767017

Availability:: In Stock

Price:: $65.06

Idler pulley assembly (pulley-idr)

The idler pulley wheel provides the tension for a multi-ribbed belt and helps the belt to rotate the drum. The drum will not spin if the idler pulley fails to put the correct amount of tension on the belt. The wheel is white in color and is made of plastic. If the drum will not tumble, is noisy, or will not start, you may need to replace this part. This idler pulley is a genuine OEM part. Please remember to disconnect the power to your dryer before you start your repair.